WEBTEC HPM - Page 65

132 V2.0/02.11
Descriptionofthememoryfunctions
ImportantinformationabouttheAUTO/MANUALTRIGGER
modes
AUTO/MANUAL
TRIGGER
The settings made under REC CONFIG are rel-
evant in this mode.
The recording time is known when the process of
recording measured values begins.
The curve memory can store 250.000 measured
values.
REC CONFIG
2 000 PTS
DURATION ÷ 2.000 = duration of the recording
interval/channel
When SCPT sensors are connected, the meas-
ured temperature values are saved at a recording
interval of 1 second.
REC CONFIG
REC RATE
Measured values are recorded at the set interval
(REC RATE).
When SCPT sensors are connected, the meas-
ured temperature values are saved at a recording
interval of 1 second.