WEG CFW100 - V;F Type of Control (P202 = 0)

First Time Power-Up and Start-Up
English
5.2.2 V/f Type of Control (P202 = 0)
Seq Display Indication/Action Seq Display Indication/Action
1
2
 Initialization mode.
 Press key to enter the first level of the
parameterization mode.
 Press keys or to select parameter
P202.
3
4
 Press key if you need to change the content
of “P202 – Type of Control” for P202 = 0 (V/f).
 Press key to select parameter P401.
 If necessary, change the content of parameter
“P401 – Motor Rated Current” according to
the nameplate.
 Press key for the next parameter.
5
6
 If necessary, change the content of
“P402 - Motor Rated Speed”.
 Press key for the next parameter.
 If necessary, change the content of
“P403 – Motor Rated Frequency”.
Figure 5.3: Sequence for V/f control
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com