WEG CFW100 - Control Type V V W (P202 = 5)

First Time Power-Up and Start-Up
English
5.2.3 Control Type VVW (P202 = 5)
Seq Display Indication/Action Seq Display Indication/Action
1
2
 Initialization mode.
 Press key to enter the first level of the
parameterization mode.
 Press keys or to select parameter
P202.
3
4
 Press key to change the content of
“P202 – Type of Control” for P202 = 5 (V V W).
Use key
.
 Press key to save the change of P202.
 Use key to select parameter P399.
5 6
 If necessary, change the content of
“P399 – Motor Rated Efficiency” according to
the nameplate.
 Press key for the next parameter.
 If necessary, change the content of
“P400 – Motor Rated Voltage”.
 Press key for the next parameter.
7 8
 If necessary, change the content of
“P401 - Motor Rated Current”.
 Press key for the next parameter.
 If necessary, change the content of
“P402 – Motor Rated Speed”.
 Press key for the next parameter.
9 10
 If necessary, change the content of
“P403 – Motor Rated Frequency”.
 Press key for the next parameter.
 If necessary, change the content of
“P404 – Motor Rated Power”.
 Press key for the next parameter.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com