WEG MVW3000 User Manual

1
QUICK REFERENCE OF PARAMETERS AND FAULTS
Fault/Alarm Description Page
A0094 Cooling system supply fault 7-4
A0096 Alarm 4 to 20 mA (current < 3 mA) 7-5
A0098 Help not recorded/Incompatible HMI version 7-5
F0099 Invalid output current offset 7-5
F0100 MVC3 fatal fault 7-5
F0101
(1)
Incompatible software version between control boards 7-5
F0102 Unknown failure in EPLD of MVC3 7-5
F0103 MVC3 RAM fault 7-5
F0105 MVC3 EEPROM failure 7-5
F0106 MVC4 fatal fault 7-5
A0108 Inverter Not Initialized 7-5
F0109 General Disable MVC3 7-5
A0110 Motor overtemperature alarm 7-5
A0111 DIx open external alarm 7-5
F0112 Motor Over Speed 7-5
A0114 Inverter ventilation alarm - set B 7-5
A0123 Programming alarm 7-6
A0124 Parameter alteration with enabled inverter 7-6
A0125 Reading/writing in inexistent parameter 7-6
A0126 Parameter Value Out of Range 7-6
A0127 Function not configured for Fieldbus 7-6
A0129 Fieldbus Connec. Inactive 7-6
A0130 Fieldbus Card Inactive 7-6
A0301 Input undervoltage 7-6
A0302 Input overvoltage 7-6
F0303 Input undervoltage 7-6
F0304 Input overvoltage 7-6
F0305 Input unbalance/phase loss 7-6
F0309 Timeout in Ride-through state Waiting Line 7-6
F0310 Short circuit on the transformer 1 secondary 7-7
A0315 Ground fault for neutral shift 7-7
F0316 Ground fault for neutral shift 7-7
F0317 Ground fault for current leak 7-7
F0320 Vab measurement feedback fault 7-7
F0321 Vbc measurement feedback fault 7-7
F0323 Ib_1 measurement feedback fault 7-7
F0324 Ic_1 measurement feedback fault 7-7
MVW3000 | 1-33

WEG MVW3000 Specifications

General

Brand	WEG
Model	MVW3000
Category	DC Drives
Language	English