WEG MVW3000 User Manual

5
DETAILED PARAMETER DESCRIPTION
5 DETAILED PARAMETER DESCRIPTION
This chapter describes in detail all the parameters of the inverter.
Level 1 Level 2 Level 3
S Status S1 Measurements S1.1 Speed
S1.2 Current
S1.3 Voltage
S1.4 Power
S1.5 Frequency
S1.6 Torque
S1.7 Temperature
S1.8 Position
S2 I/O S2.1 Digital
S2.2 Analog
S3 Inverter S3.1 References
S3.2 Status
S3.3 Software version
S3.4 Model
S4 PLC
D Diagnostics D1 Alarms and faults
D2 Hours control
C Configurations C1 HMI C1.1 Language
C1.2 Password
C1.3 Main screen
C1.4 Graphic
C1.5 Settings
C2 Ramps
C3 Control
C4 Nominal data C4.1 Inverter
C4.2 Motor
C5 LOC/REM Selection C5.1 Local
C5.2 Remote
C6 I/O C6.1 Digital inputs
C6.2 Digital outputs
C6.3 Analog inputs
C6.4 Analog outputs
C7 Protections
C8 Functions C8.1 Bypass
C8.2 Flying Start
C8.3 Ride-Through
C8.4 PID
C8.5 Trace
C9 PLC
C10 Communications
C11 Backup
P0000 - Parameter access password
Adjustable range: 0 to 999 Factory setting: 0
Acesso: Menu → Configurations → HMI → Password
MVW3000 | 5-1

WEG MVW3000 Specifications

General

Brand	WEG
Model	MVW3000
Category	DC Drives
Language	English