32967530000/00/06.2023
Contents
1 About this documentation 4
2 Safety 5
2.1 General safety notes 5
2.2 Intended use 5
2.3 Personnel 5
3 Device description 6
3.1 Technical data 8
3.2 Type plate 9
4 Unpacking the device and putting it into operation 10
4.1 Connecting the computer or computer network 10
4.2 Switch on the printer 10
5 Operating software 11
5.1 Touch display 11
5.2 Start screen 11
5.3 Menu navigation 13
6 Setting up the printer 14
6.1 Replacing the pull roller 14
6.2 Positioning the material reel on the reel holder 14
6.3 Inserting material into the print mechanism 15
6.4 Adjusting the label light barrier 15
6.5 Adjusting the head locking system 16
6.6 Inserting the transfer ribbon 17
6.7 Adjusting the transfer ribbon run 18
7 Printing 19
7.1 Setting up one-sided printing 19
7.2 Ribbon-saving function 19
7.3 Avoiding material loss 19
7.4 Avoiding data loss 20
7.5 Perforating 20
8 Cleaning 21
8.1 Cleaning the print rollers 21
8.2 Cleaning the printheads 21
8.3 Cleaning the label light barrier 22
9 Troubleshooting 23
9.1 Error display 23
9.2 Error messages and troubleshooting 24
9.3 Troubleshooting 26
10 Decommissioning and disposing of the device 27
10.1 Decommissioning the device 27
10.2 Disposing of the device 27
11 Approvals and compliance 28
11.1 Declaration of Conformity 28
11.2 FCC 28
To Next Page
Loading...
