57
Control.ini
The content of the Control.ini file can look like this:
!i1c!ess1001#
!i3o!epf1%20<2.5#
!i4t!epl1_4%50#
!i5c!cfm0<5#
!i5o!cfm32<5#
!tm01:20!rsn:\SHOW\001_SHOW.WM1#
!t&05:00!rsn2#
1
st
line: If input 1 is closed (!i1c), the open collector outputs
1 and 4 will be activated (!ess1001).
2
nd
line: If input 3 is open (!i3o), then PWM output 1 fades
within 2.5 seconds to 20% (!epf1%20<2.5).
3
rd
line: With every level change of input 4 (!i4t), the PWM
value of outputs 1 to 4 are set to 50% (!epl1_4%50).
4
th
line: If input 5 is closed (!i5c), the volume fades to level 0
within 5 seconds (!cfm0<5).
5
th
line: If input 5 is open (!i5o), the volume fades in within 5
seconds to that value which is stored in EE-Prom (!cfm32<5).
6
th
line: At 1 minute and 20 seconds after switching on the
device or after insertion of the microSD card (!tm01:20), the
first show starts in normal mode (!rsn:\SHOW\001_SHOW.
WM1).
7
th
line: Every 5 minutes (!t&05:00) the second show starts
in normal mode (!rsn2).
To Next Page
Loading...