7
Important Information and Safety Tips
1 Important Information and Safety Tips
The ProCommander
®
AX is an electronic device that can fail,
in part or in full despite careful testing. Therefore, it must not be
used in applications where personal safety could be at risk due
to the malfunction of the device.
Weigl equipment is not designed, intended, authorized or
warranted to be suitable in life support applications, devices,
systems, or other critical applications. Inclusion of Weigl
equipment in such applications is understood to be the full risk
of the customer.
Weigl assumes no liability for applications assistance,
customer produced design, software performance or
infringements of patents or copyrights.
Weigl does not warrant or represent that any license,
either expressed or implied, is granted under any patent right,
copyright, mask work right, or other intellectual property right
of Weigl covering or relating to any combination, machine or
process in which Weigl products or services might be or are
used.
ATTENTION!
The ProCommander
®
AX must not be directly
connected to voltages greater than 24V.
It is important to read this manual and familiarize yourself
with the function of the ProCommander
®
AX before working
with the device. Failure to do so may cause damage to the
To Next Page
Loading...