上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
24 / 53
To adjust I/O port polarity, do the following:
1. To enter into Port interface, press → 3:
2. If the status of the following ports is different from the actual status of the
machine tool, check the connection:
– Reference Point
– Emergency
– Tool Protect
– Stop
– Start
If the connection is not correct, tighten the connection; if it is, proceed to the
next step.
3. Optional: Press ↑ or ↓ to select the target port, and press F4 to switch its
polarity.
To Next Page
Loading...
