上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
53 / 53
5.3 Drive 400 Alarm
Cause
1. An exception in the encoder due to poor contact.
2. Out of battery. Or an exception in the battery.
Solution
1. Connect with the encoder again or change the connection wire.
2. Change the battery:
1. Manually move the machine tool to the machine origin.
2. Turn off the power of the machine tool.
3. Replace the battery.
4. Initialize the encoder:
To Next Page
Loading...
