WEIHONG NK300CX - Quick Start; Load a Program File

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
32 / 53
3 Quick Start
Through this section, you can quickly know the following machining processes for
NK300CX:
1. Load a program file.
2. Execute tool calibration.
3. Adjust the WCS.
4. Define the workpiece origin.
5. Select tools for machining.
6. Execute selective machining.
7. Execute machining.
3.1 Load a Program File
This operation is used to load a program file in the host, in a USB flash disk, or from
the internet for machining.
To load a program file, do the following:
1. Press , and enter into Program functional area.
2. Select a type of program file:
– Files in the host
– Files in a USB flash disk
– Files from the internet