上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
33 / 53
3.1.1 Load a Program file in the Host or a USB Flash Disk
This operation is used to load program files or folders in the root directory of the
host D:\NcFiles or a USB flash disk, including hidden files and folders.
Taking loading a program file in a USB flash disk as an example, to load a program
file, do the following:
1. To enter into USB interface, press 2:
2. To select a file path, press H.
3. To select the target program file, press ↑ / ↓.
4. Optional: To enable rectangular array or mirroring and duplicating, press F4,
and press one of the following:
– F1: set row number, column number, row spacing and column spacing,
and generate an array file by pressing F7.
– F2: select the mirroring direction, set position offset, and generate a
mirroring and duplicating file by pressing F7.
The generated file shows in the USB interface.
5. To load the target program file, press F1.
To Next Page
Loading...
