上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
8 / 53
7. Keys for common operations
Used to execute common operations, including Simulate, Single Block, Handle
and Reset keys.
8. Spindle control keys
Used to control spindle movement, including CW, Stop and CCW keys.
9. Extension keys
Used to customize extension functions, including K1, K2, K3 and K4 keys.
10. Keys for common ports
Used to turn on or turn off frequently used ports.
11. Keys for movement control
Used to control the movement of the machine tool, including START, STOP,
Pause, and Resume keys.
See Execute Machining for details.
12. Power Switch
Used to control power on or off.
1.2.1.2 Mounting Dimension (Unit: mm)
WH106C Dimension
WH106C Cut-out
To Next Page
Loading...
