Welbilt CREM ONE - Machine Alerts; Alarms and Warnings

ONE
46
MACHINE ALERTS
· Alarms and warnings
To alert users that routine service of the machine is due or against a situation that could possibly cause
damage to the machine, ONE has the following alerts programmed into its software:
Error
Code
Alarm Name
Warning
/ Alarm
Solution
A1 NTC is short-circuited Alarm Call a service technician to replace it
A2 NTC is not connected Alarm Call a service technician to replace it
A4
Steam Boiler
FillingUp timeout
Alarm
"Turn the main switch o and on again.
Check that the machine is receiving water."
A7 Drink too long Warning Pull the group lever down to remove the alarm
A10 Empty tank Alarm Rell the tank.
A11 Water tank not in place Alarm Put the tank in the correct position
Error
Code
Alarm Name
Warning
/ Alarm
Solution
Steam boiler sensor
AL1 Temp. Probe shortcircuited
AL2 Temp. Probe unconnected"
Alarm Call a service technician to replace it
Group boiler sensor
AL1 Temp. Probe shortcircuited
AL2 Temp. Probe unconnected"
Alarm Call a service technician to replace it
Steam boiler FillingUp timeout Alarm
Turn the main switch o and on again.
Check that the machine is receiving water."
Empty tank Alarm Rell the tank.
Water tank not in place Alarm Put the tank in the correct position
Maintenance / Cleaning
(if enabled)
Warning
(Blinks)
Do the maintenance / Cleaning.
Reset counter on Barista menu.
Filter reset
Warning
(Blinks)
Replace water lter.
Reset counter on Barista menu.
1B versions
2B versions