18 Chapter 2 Setup Welch Allyn Vital Signs Monitor 300 Series
Configuring Operating Parameters
You can change several monitor operating parameters. When changed, these settings
become the default power-up settings.
How to Use the Menu System
The monitor menu system contains three sets of menus—settings, configuration, and
service.
Settings Menu
Access the settings menu by pressing the menu button while in normal operation.
Then press repeatedly to reach the setting of interest.
54
98
37.0
128
MAP 90mmHg
71
ºF
ºC
M
Patient Type
Target Cuff Inflation Pressure
Temperature Units
Temperature Type
Pulse Tone Volume
No action for 10 seconds
or
Press any button other than
Power Off - all values saved
except target inflation pressure
Settings Menu