Welch Allyn 5300P Directions For Use

26 Chapter 2 Setup Welch Allyn Vital Signs Monitor 300 Series
Changing the NIBP Measurement Units
Default setting: mmHg.
To ch a n ge t h e NI B P measurement units:
1. Depress for 3 seconds. SET HOUR XX appears in the message window.
2. Press repeatedly until BP Units: mmHg or BP Units: kPa appears in the display
window.
3. Press or as needed to display the desired NIBP measurement units.
4. To select the displayed units and return to normal operation, either do nothing for 10
seconds or press any button other than or . If you press a function button (such
as ), the monitor returns to normal operation with that function ( ) activated.
For information on NIBP measurements, see “Patient Monitoring” on page 31.
SYS
DIA
SpO2 %
/min
ºF
ºF
mmHg
BP Units: mmHg
SYS
DIA
SpO2 %
/min
ºF
ºF
kPa
BP Units: kPa

Welch Allyn 5300P Specifications

General

Brand	Welch Allyn
Model	5300P
Category	Medical Equipment
Language	English