Welch Allyn Atlas - 3.3 Top Level Troubleshooting Index

Section 3 - Troubleshooting
SERVICE MANUAL 6200-43E REV. A
WELCH ALLYN ATLAS MONITOR 15
Remove all instrument cables and hoses
Install printer paper if printer is fitted
Review customer complaint and determine if it is safe
to plug in and turn on Atlas
If not safe to power up: smoke/flames/smell reported?
Goto Power 1
Check power available light
Goto Power 2
Check power-up state
Goto Power 3
Set language and Preserve customer settings
Goto Test Setup 1
Check date/time
Goto Test Setup 2
Reset to factory defaults
Goto Test Setup 3
Check software/firmware
Goto Test Setup 4
Check CRT Alignment Test
Goto CRT 1
Check Button Test
Goto Button 1
Check Display A/D Channels
Goto A/D 1
Check LED test
Goto LED 1
Check Printer alignment test
Goto Printer 1
Check Printer function
Goto Printer 2
3.3 TOP LEVEL
TROUBLESHOOTING
INDEX