8 ‒ Function Description | P1PY201 ‒ Laser Distance Sensor ToF 26
The sensor no longer supplies a measured value.
Note!
• If an input is set as a laser-off input, the emitted light can
also be switched on and off via the input.
• If the laser is switched off, the sensor behavior corre-
sponds to the status “No signal.”
Localization The supply voltage indicator of the sensor can be switched to
flashing green. This allows the sensor to be easily located in a
plant.
On
The supply voltage LED flashes green.
Off
LEDs in normal function.
Off
Measured value unit The measured distance can be read out in millimeters or
inches.
Millimeter
Distance values read out in mm
Inch
Distance values read out in 1/10 inch
Millimeter
Bluetooth The Bluetooth interface can be switched on/off.
On
Off
On
Bluetooth
Password
Function
The Bluetooth function can be password protected to prevent
unauthorized access.
On
Off
Note!
Only the Bluetooth function is protected. Communication is
possible via IO-Link or the OLED menu at any time.
Off
Bluetooth
Password
Enter a Bluetooth password. To access the device using the
Bluetooth app, enter this password in the app.
Note!
If the password has been forgotten, a new password can be
assigned via IO-Link.
--
8.2 Display Functions
Function Possible settings Default
Language Selecting the display language
German
English
Chinese
English
Rotate display Rotates the display 180°.
On
Off
Off
To Next Page
Loading...
