Wenglor P1PY201 - Page 38

10 ‒ IO-Link | P1PY201 ‒ Laser Distance Sensor ToF 38
Name Event code Type Specification
Maintenance necessary: Clean 0x8C40 Notifica-
tion
IO-Link
Device error – unknown error 0x1000 Error IO-Link
Short circuit – check installation 0x7710 Error IO-Link
Device temperature too high: Remove heat source 0x4210 Warning IO-Link
Device temperature too low: Isolate device 0x4220 Warning IO-Link
Temperature error: Overload 0x4000 Error IO-Link
Supply voltage too low – check tolerances 0x5111 Warning IO-Link
Speed measurement 0x1801 Warning wenglor-specific