Westerbeke Universal M3-20B - Pre-Start Inspection

PREPARATIONS FOR INITIAL START-UP
PREST ART INSPECTION
Before starting your engine for the first time or after a pro-
longed layoff - check the following items.
o Check the engine oil level; add oil to maintain the level at
the high mark on the dipstick.
o Check the DC electrical system. Inspect wire connections
and battery cable connections.
o Visually examine the unit. Look for loose or missing
parts, disconnected wires, unattached hoses, and check
threaded connections.
o Check the fuel supply and examine the fuel filter/separator
o Check the coolant level in the plastic recovery tank and at
the manifold.
bowls for contaminants.
o Check the transntission fluid level.
NOTE: Refer to the specifications pages in this manual for
fuel, oil, and transmission types and quantities.
COOLANT
RECOVERY
TANK
NOTE: If the engine has not yet been filled with coo/ant, refer
to the ENGINE COOLING CIRCUIT section of this manual.
MANtFOLD
MANIFOLD
IM-35B SHOWN)
(&J
8