Instruction for use Examination and treatment table Easy Care
** Depending on model and configuration
D2151_01 - 09/2017 8/38
The trolley supports the entire device. It has four antistatic smooth
double castors, 3 with total lock, 1 with steering lock for easy
manoeuvrability. Four bumpers protect from damages during
transport.
Electrical distribution / Take-off sockets
The electrical distribution is arranged below the rear side of the
trolley, providing the following connections:
- Power connection A,
- Earth circuit connector plug B according to DIN 42801
for ZPA-connection cable (green/yellow) DIN 42801-2
- Take-off socket C for the radiant warmer Ceramotherm
- Connection of the electrical height-adjustment **
- 3 take-off sockets 230 V~ for connecting accessories
(each max. 400 W)
The examination and treatment table Easy Care is gently
and smoothly height-adjustable by foot pedals ("soft-lift
pillar"). In this process the whole body of the device,
including the accessories attached, is moved vertically by
an electric motor. The foot pedals can be arranged at the
front or at either side of the trolley. A second pair of
pedals can be provided as an option
Patient deck with 3 raised sides
The patient deck is arranged on the trolley. 3 raised sides
prevent the patient from falling off the deck. The patient
deck provides a pad and upholstered side walls 2.1.
Drawer
The drawer can be arc-shaped slided out, which offers full
access to the user.
Drawer arranged under the patient deck
Shelf WY3035 fixed at the pillar** (optional)
without drawer max. 4 shelves can be adapted,
with drawer max. 2 shelves per device.
Drawer WY3036 ** (optional)
fixed at the shelf WY3035,
Volume 40 x 15 x 16 cm (4 l), load 6 kg,
arc-shaped sliding out to both sides
max. 2 drawers can be adapted per device.