To Next PageTo Next PageWhy there is no power applied to the Ice Maker module in my Whirlpool Refrigerator?
If there's no power to your Whirlpool Refrigerator's ice maker module, the thermal fuse in the ice maker harness might be open, in which case you should replace the ice maker harness. Alternatively, there might be a problem with the wiring harness. Check its continuity to ensure it's functioning correctly.
How to fix no LED pulses on Whirlpool Cassinetta?
If there are no LED pulses in your Whirlpool Refrigerator, it could be due to several reasons. First, make sure the Ice Maker is powered on via the User Board. If it is already on, the thermal fuse in the Ice Maker harness may be open, requiring you to replace the harness. Also, check the wiring at the emitter or receiver board to ensure it is correct. If all else fails, there could be a problem with the Ice Maker itself; see 'Ice Maker Checks'.
What to do if the ejector bar does not move on Whirlpool Cassinetta Refrigerator?
If the ejector bar in your Whirlpool Refrigerator's ice maker isn't moving, the motor may have failed. Replace the ice maker E-module to resolve this issue.
What to do if my Whirlpool Cassinetta Refrigerator has no water fill?
If your Whirlpool Refrigerator isn't filling with water, there are several potential causes. First, check the wiring to the water valve to ensure it's properly connected. Then, verify that your water supply is functioning correctly. A frozen water fill tube could also be the culprit; defrost it and inspect the valve for leaks. Finally, the water valve itself might have failed, requiring replacement.
Why my Whirlpool Cassinetta Refrigerator shows 2 LED pulses?
If your Whirlpool Refrigerator is showing 2 LED pulses, it indicates that the optics board is defective. To fix this, replace both the emitter and receiver boards.
General| Brand | Whirlpool |
|---|---|
| Model | Cassinetta |
| Category | Refrigerator |
| Language | English |
Covers NTC resistance, sensor values, valve management, and ice maker resistance tables.
Details board versions, failure codes, alarms, icons, FAQs, architecture, and built-in tests.
Explains ice maker types, diagnostics, dispenser operation, and related data.
Addresses sensor failures, airflow problems, and temperature regulation issues.
Details causes and solutions for ice buildup, moisture, and faulty ice production.
Covers fan issues, noises, alarms, UI errors, and other system malfunctions.
