6
7 segment display – version
WHY….. BECAUSE
Freezer probe sensor has to be checked by SERVICE.
"C" is blinking on display Freezer ?
Don't worry, the appliance runs at default set-point.
Refrigerator probe sensor has to be checked by SERVICE."C" is blinking on display Refrigerator
? Don't worry, the appliance runs at default set-point.
"D" blinking on display Refrigerator ? Air baffle device has to be checked by SERVICE
Freezer too warm or powered the first time.
Press alarm reset button ( bell symbol ) to turn OFF the
buzzer
"--" is blinking on the display Freezer ?
and wait about 6 hour for correct temperature inside the
Freezer.
Long-black out activated while you was away.
"-9°C or more" is blinking on display
Freezer ?
Press alarm reset button ( bell symbol ) to turn OFF the
buzzer.
Communication between Control Board and
Control Panel has to be checked by SERVICE.
"CF" is blinking on display Freezer ?
Don't worry, the appliance runs at default set-point.
Ice-maker function could be OFF. Turn Ice-maker
function ON by pressing the right push-button.
Check the if tap is open and the water is delivered
by pressing water dispenser paddle.
To use the traditional methods to make ICE waiting
Appliance doesn't make ice?
for the SERVICE check.
To Next Page
Loading...
