16
List of common questions from customer / end consumer
AKO – version
How works........ ? Answer
Freezer Temperature button [+] and [-]: This button needs to set up the Freezer
temperature set-point from -24°C to -18°C
Fridge Temperature button [+] and [-]: This button needs to set up the Fridge
temperature set-point from +2°C to +6°C
Stand-by button: This button needs to switch ON/OFF the
appliance without remove the power supply.
It must be pressed during 3 seconds.
Mode button: This button needs to engage/disengage the
Cubed/Crushed ice mode (it will change the
blades rotation).
Dispenser lamp button: This buttons needs to switch ON/OFF the
dispenser lamp (the dispenser lamp will be
switched ON every time the paddle is
pressed).
Vacation: Fridge compartment stop to run. You can
leave fridge door closed because every 30
minutes the compartment is refreshed for 2
minutes to avoid growing bacteria.
To Next Page
Loading...
