7
List of Failure Codes for:
Biruni – version
WHY….. BECAUSE
Freezer probe sensor has to be checked by SERVICE.
"SF" is blinking on display Freezer ?
Don't worry, the appliance runs at default set-point.
Refrigerator probe sensor has to be checked by SERVICE.
"F" is blinking on display Refrigerator?
Don't worry, the appliance runs at default set-point.
"D" blinking on display Refrigerator ?
Air buffle (Dumper) unreliable. Device has to be checked by
SERVICE.
Ice maker SANKYO sensor has to be checked by SERVICE
"HF" is blinking on display Freezer ?
Don't worry, the appliance runs at default set-point.
"LF" is blinking on display Freezer ?
Production test not passed.
Wrong User Interface board.
“UU" is blinking on display Freezer ?
Device has to be checked by SERVICE.
Communication between Control Board and
Control Panel has to be checked by SERVICE.
"CF" is blinking on display Freezer ?
Don't worry, the appliance runs at default set-point.
Ice-maker function could be OFF. Turn Ice-maker
function ON by pressing the right push-button.
Check the if tap is open and the water is delivered
by pressing water dispenser paddle.
To use the traditional methods to make ICE waiting
Appliance doesn't make ice?
for the SERVICE check.
TYPICAL ALARM SUMMARY
To Next Page
Loading...
