Whirlpool Cassinetta - Sensor, Airflow, and Temperature Issues

49
Troubleshooting & Diagnostic:
Sensor failure indication “C”, “SF” or “F” on the display (*)
(*) Note: After 2006 range, the failure indication on the display will be shown only in the first 10 minutes.
To see the indication again, plug out and plug in the appliances.
Check on which compartment
side you have the sensor failure
indication.
Check the resistance value
according to the temperature
table on page 3 in this
document.
Sensor OK
Sensor defect
or not calibrated
Check the connections
to the main board
Connections OK
Change the Main
Board
Change the sensor