72
Check that the screws are completely fixed.
If the noise problem persist, follow the instruction in
Service Bulletin 4812 711 40180.
Hinges noise?
Not correct fixing of bottom hinge.
Damper noise?
Cut a small part of both EPS cover (see picture below),
following the instructions in the Service Bulletin 4812 711
40328.
Note: In this case is not necessary to replace the damper!
On recent appliances (after
w18 2008 for IDI, after w23 for NO IDI):
Air baffle is no more a single component, it became
an assembly. Noise could be generated by a
friction between sliding door and EPS cover.
1
3
2
To Next Page
Loading...
