23
7. Configuration software WIKAsoft-TT
For installation please follow the instructions of the installation routine.
7.1 Starting the software
Start the configuration software by double-clicking on the WIKAsoft TT icon.
After starting the software, the language
can be changed by selecting the flag of the
country in question.
The selection of the COM port is made
automatically.
After the connection of a transmitter (using
the PU-548), on pressing the “Start” button,
the configuration interface is loaded.
The configuration interface can only be loaded when an instrument is
connected.
To Next Page
Loading...
Need help?
General
