Need help?Do you have a question about the Windhager FB 5210 and is the answer not in the manual?
General| Brand | Windhager |
|---|---|
| Model | FB 5210 |
| Category | Control Unit |
| Language | English |
Outlines the intended application and compliance with safety standards for the operation module.
Details critical safety hazards like electric shock and essential precautions during installation and operation.
Explains how the operation module controls the heating system and exchanges data with the heating circuit module.
Lists the main adjustments users can make, such as temperature, mode, and programmes.
Details the physical controls and display elements of the operation module.
Provides a detailed breakdown of the information displayed on the module screen and its icons.
Guides on setting desired daytime and night reduction room temperatures.
Instructions on adjusting the displayed room temperature to match actual measured values.
Explains how to switch between different heating and hot water operation modes.
Details on activating the 'party' function and manually switching domestic hot water on or off.
Procedures for adjusting domestic hot water temperature and setting the time and day of the week.
Instructions for programming a holiday period to maintain a minimum room temperature.
How to view various temperatures measured by the controller, such as boiler and room temperatures.
Understanding indicators for controller outputs like circulation pump and mixing valves.
Checking the current setpoint values against the measured temperature levels.
Accessing information on collector temperature and solar energy profits.
Explains automatic programmes for heating and hot water based on lifestyle needs.
Details of the four pre-set standard programmes for domestic and commercial use.
Guides on selecting pre-set standard programmes for heating and domestic hot water.
Step-by-step instructions for modifying selected standard programmes to suit specific needs.
How to check and verify the programmed switching times for current and standard automatic programmes.
Practical examples demonstrating how to select and modify standard programmes for specific needs.
A guide and table for setting up fully customised automatic programmes according to user requirements.
General steps for diagnosing issues when the heating control does not function as expected.
Procedures for initializing the controller and verifying its basic functionality.
Testing controller sensors and comparing set values with actual measured values.
Understanding and responding to error codes displayed by the controller.
Guidance on powering the module via bus connection and initial setup after voltage application.
Definitions of key operational terms like operational start, time, specialist level, and measured values.
Details on power supply, cable length, bus interface, operating temperature, and certification.
Guidelines for selecting an appropriate reference room and optimal installation locations.
Provides the physical dimensions of the operation module for installation planning.
Step-by-step instructions on how to physically attach and secure the operation module.
Essential warnings and guidelines for safely wiring the operation module and connecting it to the system.
Instructions on setting up the DIP switches to assign the operation module to the correct heating circuit.
To Next Page