Operating instructions
Operation module FB 5210
5
1Safety notice
Intendend use
This operation module is a modern electronic device.
The operation module complies with the following EU guidelines:
•73/23/EWG "
Low Voltage Guidelines"
•89/336/EWG "EMV Guidlines",
including amendment guideline 92/31/EWG
Das Bedienmodul ist für den Einsatz zusammen mit einem Heizkreismodul ent-
sprechend den Spezifikationen des Herstellers bestimmt.
Anderweiti
e Verwendun
des Bedienmodules ist nicht zulässi
.
Safety
This device uses the latest technology and complies with safety regulations.
Danger
The operation module is electrically operated. Improper installation or attemp
repair can result in a life -threatening electric shock hazard. Installation and
commissioning must be performed only by adequately qualified specialist. It is
forbidden to open the device or ancillary components. Repairs are to be carried
out only by the manufacturer.
Instructions in the text that are marked by a warning symbol must be ob-
served under all circumstances.
Warning: Do not switch on the power before all wiring work on the
boiler (corresponds to the heating circuit module) are finished and
the operation module is plugged onto the socket (Intialising the
electronic).
Please wait until the temperature indication on the operation module
shows the proper value, to start with the settings. The duration of
the initialisation lasts max. 2minutes.
To Next Page
Loading...
Need help?
General