Operating instructions
Operation module FB 5210
20
Heating intervals are
shown as dark seg-
ments on the time-
line. You can modify
heating intervals any
way you wish by
adding or removing
segments.
The instructions here show how to adapt a room heating programme. The proce-
dure for domestic hot water is identical, simply press the key instead
of the key.
1.Press the key once.
•The setting for the first day or
day block appear in the display.
(the example shows standard
programme 3). The time marker
is positioned at the start of the
first heating period.
2.If necessary move the time marker
to desired point (4.00 a.m. in the
example) using the key
(press the "-" or "+" sides). The
marker moves in 15-minute incre-
ments.
3.Press the key to add or remove heating periods ("overwrite" the
segments).
•Pressing the
side adds extra segments to the time-line (=daytime heat-
ing).
•Pressing the side removes existing dark segments from the time-line
(=night reduction).
Heizperioden
P
time marker
(flashing)
day block
P
To Next Page
Loading...
Need help?
General