EasyManuals Logo

Windsor Commodore 20 User Manual

Windsor Commodore 20
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
Safety
The following symbols are used throughout this guide as indicated in their descriptions:
HAZARD INTENSITY LEVEL
There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY.
The level of hazard intensity is determined by the following definitions:
WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.
CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property damage.
FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.
Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating
condition. Following is information that signals some potentially dangerous conditions to the operator or the equip-
ment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on the
machine. Please take the necessary steps to train the machine operating personnel.
FOR SAFETY:
DO NOT OPERATE MACHINE:
Unless Trained and Authorized.
Unless Operation Guide is Read and understood.
In Flammable or Explosive areas.
In areas with possible falling objects
WHEN SERVICING MACHINE:
Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine. Use
manufacturer approved replacement parts.
86400940 Operators Manual - CMD20

Other manuals for Windsor Commodore 20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Windsor Commodore 20 and is the answer not in the manual?

Windsor Commodore 20 Specifications

General IconGeneral
Electrical230V, 8 A, 50 HZ
Power Cable75’ (23 m) (12 gauge)
Electric Propelling Motor(1) –1/4 hp DC (186 watts) with variable speed forward.
Electric Vacuum Motor(1) – 3 stage, 1 hp 99 cfm (2.80 m³/min.)
Drive SystemTransaxle unti variable speed Operating Speed: 0-100ft/min (30m/min)
Waterlift117” (297 cm)
Brush Speed1000 RPM
Solution Capacity20 Gallons (75 ltr)
Recovery Capacity20 Gallons (75 ltr)
Brush(1) 18” (45.8 cm)
Solution Pump100 psi (6.9 BAR), diaphragm style, demand pump
Solution Spray2 quick change jets
Vacuum Shoe22” (56 cm) wide, cast urethane floating and pivoting.
Wheels - Front (2) - Rear (2)4” dia. (10 cm) caster by 2.5” 10” dia (25 cm) wheels by 2”
Weight and Dimensions IconWeight and Dimensions
Dimensions - Weight215 lbs. (98 kg)
Dimensions - Length51” (130 cm)
Dimensions - Height44” (111 cm)
Dimensions - Width22” (56 cm)

Related product manuals