Chapter 4: Web Management
EN-83
6. To bind multiple links with the automation-type controllers to enable
remote automatic control, select the controller ID in the Switch link field
and click Add. Select ON or OFF the device when the alarm is
triggered.
7. In the Switch link field, click Remove to delete the current binded
automation-type device.
8. Click Apply to save the settings.
4.4.9 Wireless Relay DI
This option allows you to configure the Wireless Relay DI settings.
1. Click .
2. Select the location, device number, and specify the sensor name.
Click on the pull-down menu to see more options.
3. Select the security zone while enabling partial arm.
To Next Page
Loading...