MULTI- ZONE / FROZEN FOOD VENDOR • 3576 • 4222618A
Table of Contents
INTRODUCTION ............................ 1
SPECIFICATIONS .......................... 2
UNPACKING .................................. 3
LOADING PRODUCTS ................... 5
TRAY ADJUSTMENTS................... 6
SPIRAL ADJUSTMENT .................. 8
AUTOMATIC DELIVERY LIFT ....... 9
CONTROLLER FUNCTIONS ........ 11
SERVICE MODE ........................... 12
BASIC PROGRAMMING SETUP .. 12
4.0.7 REFRIGERATION
CONFIGURATION SETTINGS ..... 18
PRICING ...................................... 20
7 ADVANCED OPTIONS .............. 21
9 TEST ALL MOTORS.................. 21
0 DIAGNOSTICS .......................... 22
TEMPERATURE CONTROL ......... 26
HEALTH SAFETY FIELD TEST .... 28
REFRIGERATION......................... 29
REMOVING THE REFRIGERATION
SYSTEM....................................... 34
PREVENTIVE MAINTENANCE..... 34
CONVERTING FROM SINGLE
ZONE TO MULTI-ZONE MODE .... 35
CONVERTING FROM MULTI-ZONE
MODE TO SINGLE ZONE ............. 35
REPLACE AIR FILTER ................. 36
PARTS ORDERING PROCEDURE 38
BEFORE CALLING FOR SERVICE38
Please have the model and serial
numbers if you need service and parts
information. The numbers are on the
identification plate located on the back
side of the cabinet of the vending
machine.
If you have any questions pertaining
to information in the manual,
replacement parts or the operation of
the vendor, then you should contact
your local distributor or:
VendNet
8040 University Blvd
Des Moines, IA 50325
Phone: (800) 833-4411
International (515) 274-3641
Parts Fax: (515) 274-5775
Sales Fax: (515) 274-0390
E-mail: vendnet@vendnetusa.com
MODEL NUMBER: ___________________________________
SERIAL NUMBER: ___________________________________
To Next Page
Loading...