WMF 1500 S+ - Page 113

113
User Manual WMF1500S +
Messages and instructions
Error pattern Action instructions
• Milk foam not OK
• Temperature too cold
ortoo hot
BasicMilk
 Change milk nozzle
Use asuitable milk nozzle on the combi spout.
Milk nozzle 3kW
• very cold milk (up to 8°C) green
• chilled milk (8to 16°C) white
• non-chilled milk (above 16°C) caramel
 Clean the combi spout
w Care w Clean the milk system manually, page 99
If error not remedied
 Use another milk nozzle from the accessories
• Milk foam not OK
• Temperature too cold
ortoo hot
DynamicMilk
 Perform aquality check
This function is enabled for trained staff only.
Contact the Service department if needed.
EasyMilk
 Check whether the milk temperature is the same
as the set temperature
 Clean the combi spout
w Care w Clean the milk system manually, page 99
• The milk foam
dispensing sputters
severely
• Milk too hot
 Check whether the milk system has been cleaned
 Clean the milk system
w Care w Milk system cleaning overview, page 87
 Check whether the milk has been cooled
sufficiently