WMF 1500 S+ - Button Layout; Postselection

56
User Manual WMF1500S +
Software | Operating options
Milk system refill
This function fills the milk system. “Milk system refill”
can be activated here.
Options: • active
• inactive
Default value:
inactive
active The errors are shown on the display as atext
message.
Button layout
Various standard button layouts are saved and can be
selected here.
PostSelection
Options: • active
• inactive
Default value:
inactive
active The type of coffee and the size of the
beverage are requested after the beverage has
been selected.
The names of the types of coffee and the sizes
can be modified. (Type of coffee and S-M-L).
The displays and options will vary, depending
on the model.
• Size 1, 2and 3
• Portioner 1, 2, and 3
• Milk type
• Syrup 1, 2, 3, and 4 (optional)
For self-service mode, afew functions can be switched
to be inactive.
The functions and their pads are not displayed in the
inactive state.
Milk system refill
w Care
page 43
Button layout
DS_04_05_02
PostSelection
DS_04_05_03
Options which are needed by the
post-selection function are enabled
in the System menu.
System
w starting on page 66