WMF 1500 S+ - Manual Cleaning; Clean the Operating Panel (Cleanlock)

93
User Manual WMF1500S +
Care | Manual cleaning
Rinsing
Rinsing starts.
This part of the routine takes approx. 30minutes.
 Empty collection container
 Empty and dry the water tank
 Thread in the sealing plug again
(use aflat screwdriver; see illustration 1and2)
 Place the water tank
 Replace the collection container
 Turn on main water supply tap
Subsequent rinses are from the mains supply.
The descaling is complete.
Completion is indicated on the display.
5.5 Manual cleaning
5.5.1 Clean the operating panel (CleanLock)
 Touch CleanLock
A 15-second countdown starts.
The touch display can now be cleaned.
The touch display is activated again 15seconds after
the last time it was touched.
Scalding hazard
• If abeverage is initiated accidentally, there is
ahazard of being injured.
> Always lock out the touch display with
“CleanLock” before cleaning.
• There is arisk of causing scratches or scoring.
> Clean the display with aclean, damp cloth.
Do not use any cleaners or implements.
> Use soft cloths for cleaning.
> We recommend adamp microfiber cloth.
Order numbers for the WMFcare
program
w Accessories and spare parts
page 124
CAUTION
Follow the Safety chapter
w starting on page 7
IMPORTANT
Follow the Warranty chapter
w starting on page 119