WMF 1500 S+ - Antifreeze; Transport Preparation; Grinding Degree Setting; Portioner; Bluetooth (Optional)

71
User Manual WMF1500S +
Software | System
Antifreeze/transport preparation
The routine for partially emptying the boiler water
system is started here.
Partially emptying is necessary prior to shipping
via courier or package carrier, particularly in winter
months, in order to prevent damage.
Grinding degree setting
The grinding degree can be adjusted from the display.
• Grinding degree grinder 1
• Grinding degree grinder 2
Lower number -> finer grinding degree
Higher number -> more coarse grinding degree
The setting has intervals of 0.25.
Up to half agrinding degree can be adjusted in
each step. The grinder must be run between each
adjustment.
Only for trained personnel and service.
Portioner
The names of the beans and powders used can be
saved here.
Espresso or Café Crème are the default options
available.
Bluetooth (optional)
The optional WMFBluetooth stick is required for this
function.
Options: • active
• inactive
Default value:
inactive
 Set Bluetooth to active here
 Open the operating panel
 Insert the WMFBluetooth stick on the back side of
the operating panel
 Switch the coffee machine off and on again
Antifreeze /
Transport preparation
DS_04_10_10
Grinding degree setting
DS_04_10_07
Portioner
DS_04_10_11
Applies to machines with two
grinders and one powder hopper.
Bluetooth
DS_04_10_14