122
User Manual WMF1500S +
Appendix: Technical data
Installation clearances For operating, service, and safety reasons the
machine should be installed with aclearance
from the building or non-WMFcomponents of
not less than 50mm at the sides and 50mm at
the back.
A minimum working space of 800mm in
front of the coffee machine is recommended.
Clearance of at least 200mm above the product
hopper is recommended. The height of the
installation surface above the floor is at least
850mm. If the coffee machine connections
are to be run downwards through the counter,
please make space for the lines, which can
reduce the usable space below the machine.
Installation dimensions of the
water filter
See the User Manual for the water filter.
We reserve the right to make technical modifications.