WMF 5000S+ - Postselection; Caffeine-Free

52
User Manual WMF5000 S +
Software | Operating options
PostSelection
Options: • active
• inactive
Default value:
inactive
active The type of coffee and the amount of the
beverage are requested after the beverage has
been selected.
The names of the types of coffee and the sizes
can be modified. (Type of coffee and S-M-L).
The displays and options will vary, depending
on the model.
• Size 1, 2and 3
• Portioner 1, 2, 3and 4
• Milk type 1and 2
• Cold beverages
• Syrup 1, 2, 3, and 4 (optional)
For self service mode, afew functions can be switched
to inactive.
The functions and their pads are not displayed in the
inactive state.
Caffeine-free
Options: • active
• inactive
Default value:
inactive
Decaf factor
The value for the Decaf factor is entered here.
Ground coffee quantity for Decaf (decaffeinated
coffee) is set by percentage for the ground coffee
quantity set in the recipe.
This setting applies to all coffee beverages with
pre-selected “Decaf”.
PostSelection
DS_04_05_03
Caffeine-free
DS_04_05_05
For aDecaf factor of 15 %,
CaféCrème is brewed with 15 %
more ground coffee, for example,
when prepared using the Decaf
function.