WMF 5000S+ - Grinding Degree Setting; Brewing Pressure Display; S-M-L Function

67
User Manual WMF5000 S +
Software | System
Grinding degree setting
The grinding degree can be adjusted from the display.
Lower number > finer grinding degree
Higher number > more coarse grinding degree
Maximum half agrinding degree can be adjusted in
each step. The grinder must be run between each
adjustment.
Only for trained personnel and service.
Brewing pressure display
The brewing pressure indicator can be activated here.
Options: • active
• inactive
Default value:
inactive
S-M-L Function
Small
Standard modification factor for beverage sizes for
S-recipes that are newly activated.
Default value: 75 %
Large
Standard modification factor for beverage sizes for
L-recipes that are newly activated.
Default value: 125 %
Options: • active
• inactive
Default value:
inactive
Grinding degree setting
DS_04_10_07
Brewing pressure display
DS_04_10_15
S-M-L
DS_04_05_04
S M L
Cup volume S-M-L
w Software
w Beverages
page 41
Tip
Beverage sizes S-M-L can also be
defined in the recipe and are then
available directly as abeverage
button.