WMF 5000S+ - Display Brightness; Reduce Brightness Automatically; Touch Calibration; Display Background

64
User Manual WMF5000 S +
Software | System
Event display (message)
Options: • active
• inactive
Default value:
inactive
active The illumination during amessage can be
adjusted.
Illumination for messages (event)
•Eventsidescolour
Display brightness
The brightness of the display is adjusted here.
Reduce brightness automatically
Options: • active
• inactive
Default value:
active
active
If “Reduce brightness” is set to active, then
the display brightness is reduced automatically
5minutes after the last beverage is dispensed.
If the display brightness has been dimmed,
the display returns to the selected brightness
level when it is first touched. The second
time abeverage button is touched, the
corresponding beverage is dispensed.
Touch calibration
Recalibrate the touch display.
Display background
The colour design for the touch display can be set here.
• Colour of the main page
• Colour for additional pages
For example, “Beans empty”
message.