WMF 5000S+ - Logo

54
User Manual WMF5000 S +
Software | Operating options
Logo
Manufacturer's logo
Options: • active
• inactive
Default value:
active
active The manufacturer's logo is shown at the top
right of the ready-to-operate display.
Customer logo
Options: • active
• inactive
Default value:
inactive
active When the option is set to “active” and
acustomer logo has been downloaded, the
customer logo is shown at the center of the
header line when ready to operate. It shows
the customer logo when the vending devices
are connected. In this case, both logos cannot
be displayed.
Load customer logo
Insert the USB stick containing the customer logo.
Load the customer logo.
Size of customer logo
The logo must not be greater than 80pixels high.
Larger logos will be scaled to this size automatically.