96
7.6 Preparing coffee
7.6.1 Coffee beverages (Espresso, Ristretto, Café Crème, Filter Coffee, etc.)
Caution!
Scalding hazard in the area of the combination
spout 7.
If the coffee beans hopper and/or ground coffee hopper are
full (see chapter 7.2 on page 91) and the machine is ready
for operation, coffee beverages can be dispensed by press-
ing one of the beverage keys. The following message ap-
pears in the display:
If, for example, you want to prepare two cups of espresso,
proceed as follows:
1. Place two espresso cups beneath the combination
spout 7. You may need to adjust the height of the com-
bination spout, depending on the size of cup used (see
chapter 7.5 on page 95).
2. Press the 2x key, then press the key labelled Espresso
on the control panel 5 (to set the two-cup function,
see 7.4 on page 93).
3. While brewing is taking place, the green light around
the beverage key pressed flashes, and the other key
lights are not lit. The display shows the name of the
coffee beverage selected and the progress of brewing.
Quantity pre-selection is possible (see chapter 7.6.3 on
page 98).
7
5
To Next Page
Loading...
Need help?
General
