113
8 User guide
The machine user guide is provided in the form of a touch
screen display. When the machine is ready for operation,
the following display appears:
Pressing on the blank area of the display will produce the
additional symbol , which can be used to call up user
information.
The symbol appears if a malfunction has occurred or
user information is displayed (see chapter 11 on page 148).
In “self-service” mode, no selection symbols are displayed.
Pressing anywhere on the display will produce a request
for access authorisation (PIN number, see chapter 8.5 on
page 124).
Pressing the soft key takes you into a second level,
where a selection menu is available. If you have allocated
access authorisations (PIN numbers) (see chapter 8.5 on
page 124) on pressing the soft key you will be asked
for your PIN number. Key in your PIN number. When
the correct PIN number is inputted, the selection menu is
displayed.
This selection menu allows you to set or alter various set-
tings, depending on your access authorisations. The indi-
vidual menu items are explained step by step in the chap-
ters that follow:
To Next Page
Loading...
Need help?
General
