100
7.7 Hot water dispensing
If the machine is ready for operation, hot water can be dis-
pensed by pressing the optional hot water key 10.
Caution!
Scalding hazard in the area of the hot water
spout 11.
Hot water can be dispensed in three different ways via the
hot water spout 11:
1. Measured dispensing
Press the hot water key 10 to start dispensing. Dispens-
ing stops automatically when a pre-defined quantity has
been dispensed.
2. Start-stop function
Press the hot water key 10 to start dispensing. Press
again to stop.
3. Free flow
Dispensing continues as long as the hot water key 10 is
pressed.
Your WMF customer service engineer will set your pre-
ferred alternative for you as required.
During hot water dispensing, the beverage selected is
shown in the display. In the example shown here, a small
portion of hot water has been dispensed.
If the machine is fitted with an eight key control panel you
can press the 2x button and take a larger portion of hot
water.
10
11
To Next Page
Loading...
Need help?
General
