EasyManua.ls Logo

Wolf CGB-75 - User Manual

Wolf CGB-75
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WOLF GMBH / POSTFACH 1380 / D-84048 MAINBURG / TEL. +49.0.87 51 74- 0 / FAX +49.0.87 51 74- 16 00 / www.WOLF.eu
Doc. no.: 3062555_201804 Subjecttomodications
GB
Installationandoperatinginstructions
Wall mounted gas condensing boiler
CGB wall mounted gas condensing boiler
CGB-75
CGB-100

Other manuals for Wolf CGB-75

Questions and Answers

  • M
    Mike RosalesSep 3, 2025
    What to do if my Wolf CGB-75 return sensor is faulty?
    • S
      Sharon ThomasSep 4, 2025
      Check the cable and return sensor of your Wolf Boiler.
  • W
    Whitney ConleySep 4, 2025
    What to do if my Wolf CGB-75 BCC is missing?
    • M
      murphymatthewSep 4, 2025
      Fit the correct boiler coding card to your Wolf Boiler.
  • D
    Drew ChavezSep 5, 2025
    What to do if my Wolf CGB-75 Boiler shows incorrect BCC?
    • D
      Daniel SanchezSep 5, 2025
      Fit the correct boiler coding card to your Wolf Boiler, as the current card is incompatible with the control unit PCB.
  • J
    Jason WilsonSep 5, 2025
    What to do if my Wolf Boiler has a flame failure during operation?
    • M
      michaelburnsSep 5, 2025
      If the flame fails within 15 seconds after flame recognition, check the CO values and the ionization electrode and cable. Then, press the reset button.
  • A
    Autumn LewisSep 6, 2025
    How to fix TBV excess temperature in Wolf Boiler?
    • C
      Crystal FosterSep 6, 2025
      If the flow temperature has exceeded the limit for the TBV shutdown temperature, or if the heat exchanger is extremely dirty, or if the water pressure switch switches off at a pressure less than 1.0 bar, you should: * Check the system pressure. * Check the heating circuit pump. * Vent the system. * Press the reset button. * Clean the heat exchanger. * Check the TB combustion chamber. * Increase the system pressure. * Check the dirt filter.
  • W
    Wendy HobbsSep 6, 2025
    What to do if my Wolf Boiler shows TW excess temperature?
    • C
      Christopher PerezSep 6, 2025
      If the flow/return temperature has exceeded the limit for the TW shutdown temperature, check the system pressure, vent the system, and set the pump to stage 2 or 3.
  • S
    Stacey GarzaSep 7, 2025
    What to do if my Wolf Boiler indicates TBA excess temperature?
    • A
      Antonio Duncan MDSep 7, 2025
      If there is overpressure in the flue gas system, clean the heat exchanger, check the flue gas system, and check the ventilation air.
  • F
    foleyabigailSep 7, 2025
    Why does my Wolf Boiler show a faulty flow sensor?
    • M
      Mary BrooksSep 7, 2025
      The sensor for the flow temperature or the cable may be faulty, or the gas pressure may be less than the selected value at the gas governor (only displayed after 15 min). To resolve this, check the lead, flow sensor, gas pressure, and gas governor (accessory).

Wolf CGB-75 Specifications

General IconGeneral
TypeCondensing Boiler
Output75 kW
Fuel TypeNatural gas
Nominal heat output 80/60 °C75 kW
FuelNatural gas

Related product manuals