E Series Oven Quick Start Guide

Oven Operation

For complete information on the operation and maintenance

of your Wolf product, refer to the use & care guide.

CAUTION

Do not place cookware on the oven oor or use

aluminum foil or other material to line the oven oor or

side walls. Failure to adhere to this notice will damage

the porcelain interior and will void your warranty.

PRIOR TO USE

To ensure all residual oil from the manufacturing process has

been removed, each oven must go through the following

procedure.

1 Clean oven thoroughly with hot water and a mild deter-

gent. Rinse and dry with a soft cloth.

2 Turn on ventilation. Some smoke and odor is normal.

3 Touch ROAST (ROAST for lower oven) and set tem-

perature to 550°F for one hour.

4 Touch OFF and allow oven to cool with the door closed.

EXTENDED OPTIONS

1 To enter extended options mode, touch and hold SET

CLOCK for 5 seconds.

2 Touch ENTER to scroll through options, then follow

instructions on the control panel display.

3 To exit, touch CLEAR.

SETTING CLOCK

1 Touch SET CLOCK on the control panel.

2 Touch number pads to set time of day.

3 Touch ENTER, then touch 1 for AM or 2 for PM.

4 Touch ENTER.

SETTING TIMER

1 Touch SET TIMER on the control panel.

2 Touch number pads to set time in hours and minutes.

3 Touch ENTER.

4 Oven will chime and time will ash when complete. Timer

will continue to chime until CLEAR is touched.

SETTING OVEN CONTROLS

1 Touch desired cooking mode on the control panel. For

double ovens, touch UPPER/LOWER to select oven.

2 Touch ENTER to select preset temperature or use number

pads to change temperature.

3 Touch ENTER.

SETTING CONTROLS FOR PROOF

1 Touch PROOF.

2 Oven temperature is preset to 85°F. Touch ENTER to

select preset temperature or use number pads to change

temperature up to 110°F.

3 Touch ENTER.

SETTING CONTROLS FOR TEMPERATURE PROBE

1 Touch desired cooking mode.

2 Touch ENTER to select preset temperature or use number

pads to change temperature, then touch ENTER.

3 Insert probe into the thickest area of food. When making

bread, cook for approximately 10 minutes before inserting

probe.

4 When preheat is complete, use a pot holder to lift probe

receptacle cover, then insert probe.

5 Touch TEMP PROBE. Use number pads to select tem-

perature, then touch ENTER. Probe temperature appears

in the display until set point is reached.

6 An audible chime indicates internal temperature has

reached probe set point. Remove, then reinsert probe to

verify internal temperature.

SETTING CONTROLS FOR SELF-CLEAN

For 3-hour self-clean:

1 Touch CLEAN.

2 Touch ENTER.

For 4-hour self-clean:

1 Touch CLEAN.

2 Touch TIMED COOK.

3 Use number pads to increase stop time by 1 hour.

4 Touch ENTER twice.

Wolf e Series - Page 86

Table of Contents

Other manuals for Wolf e Series

Related product manuals