PAGE 14
• SINGLE OVEN
~ Unit must be off.
~ Press and Hold the TEMPERATURE key and the 0 “ZERO” key
for 3 seconds.
~ Release both keys.
NOTE: To toggle from one error code to another, the ENTER key
must be pressed. The ENTER key will need to be pressed seven
times to make sure there are no other codes.
NOTE: Diagnostic Mode will end 2 minutes after the last key stroke
or by pressing the CLEAR key.
NOTE: To clear any error codes, the oven must be in diagnostic
mode. Pressing the COOK TIME and STOP TIME key at the same
time will clear the error codes recorded. This must be performed after
the unit is serviced.
To Next Page
Loading...
