Woodward DTSC-200A - Navigation Button Icon Explanations

Manual 37941A DTSC-200A - ATS Controller - Operation
© Woodward Page 11/37
25
Navigation Button Overview
The display contains on the top right corner a field which tells the operator which navigation
buttons right to the display are currently active.
Explanation:
Requestion mark – Go into alarm list
Tool – Go into configuration menu
Return – Acknowledge
Leave current screen – ("Escape" / "ESC")
Cursor down – Go in the list one line down
Cursor left – Go with the cursor one step left
Cursor right – Go with the cursor one step right
Cursor up – Go in the list one line up
Display Brightness – The plus/minus buttons determine display brightness
Minus – One step less
Plus – One step more
Next Visualization Screen – Go to the next visualization screen.
One Visualization Screen back – Go one visualization screen back.
Select parameter – Go to the next parameter element in the screen
Select next parameter group – Especially for navigating in LogicsManager screens
it realizes group jumps of LogicsManager Command Variables.